PRESS RELEASE       
 

   
       PRODUCT RANGE      PRODUCTION FACILITY     RESPONSE FORM  

Polyurea / Polyurethane       Spray elastomers
    

SE210 Polyurea / polyurethane spray elastomer

SE 210 is a high abrasion resistant polyurea / polyurethane spray elastomer used for Tank Liners, Bed Liners, Pond Liners and more. Spray elastomer lining technology boasts excellent chemical resistance to many liquids with high build thickness characteristics, rapidly drying finishes and very low perm ratings.

Translation de Francais

SE235 Polyurea spray elastomer

SE235 Polyurea can also be applied over a variety of different substrates (concrete, metals, wood and more) in a wide range of temperature and humidity environments. However, like all protective lining and coating systems, polyurea's remarkable advantages and fast set characteristics make no excuse not to perform proper surface preparation and quality control testing during application.

Polyurea offers excellent adhesion to properly prepared surfaces and is used as an alternative to epoxy, polyurethane, fiberglass and other mat reinforced lining systems. Polyurea coatings combine high tensile strength and elongation properties with low permeability and high impact resistance, making them ideal where a tough, flexible (or hard) liner is needed.
 
Polyurea is commonly used as a material for lining primary containment tanks as well as a lining system for secondary containment structures. Many of the world's sea aquariums have turned to polyurea lining technology due to its fast set return to service characteristics, ability to achieve UV stable colors, and its superior physical properties over conventional linings.

Polyurea is also used extensively in the water and wastewater industries and are ideal liners for most water tanks, including salt water. Polyurea can even withstand most chemical gasses produced at waste treatment plants.

Polyureas are also recommended for lining large diameter pipes, manholes, clear wells and process tanks for potable water and non-potable water, basins and reservoirs, lift stations and reserve fire water tanks.

Polyureas contain no VOCs

Technical data

Translation de Francais

PAC8848AWH Aliphatic Polyurea

PAC8848AWH is a two component, spray-in-place, flexible, 100% solids, aliphatic polyurea system. PAC8848AWH is a fast cure, textured surface, multi purpose material, designed for commercial and industrial applications not requiring rated materials. It exhibits excellent adhesion to most materials and is suitable as a protective top coat over aromatic polyurea and polyurethane base coats.

Custom colours are available on request.

Technical data

PAC8848AWH