|
|
|
TECHNICAL DATA
2-COMPONENT FOAM
|
U2-200
|
U2-600
|
|
COMPRESSIVE STRENGTH (ASTM D-1621)
10%, PARALLEL: 19 PSI
10%, PERPENDICULAR: 13.4 |
+
+
|
+
+
|
|
TENSILE STRENGTH (ASTM D-1623)
PARELLEL: 34 PSI
PERPENDICULAR: 24.1 PSI |
+
+
|
+
+
|
|
DIMENSIONAL STABILITY (ASTM D-2126)
-40°F, 2-WKS: +.88%, VOL. CHANGE
158°F, 100% rh 2-WKS: +14%, VOL. CHANGE |
+
+
|
+
+
|
|
DENSITY (ASTM D-1622): 1.75 +/- 0.2 PCF |
+
|
|
|
K-FACTOR (ASTM C-177): .144 |
+
|
+
|
|
R-VALUE (ASTM C-177): 6.9/IN. |
+
|
|
|
WATER ABSORPTION (ASTM D-2842): 1-3.5% |
+
|
+
|
|
CLOSED CELL CONTENT (ASTM D-2856): 90%, MIN. |
+
|
+
|
WATER VAPOR TRANSMISSION (ASTM E-96):
1.63 PERM INCH |
+
|
+
|
|
SHELF LIFE: 1 YEAR |
+
|
+
|
|
CONTAINS NO CFC'S |
+
|
+
|
|
CONTAINS NO UREA FORMALDEHYDE |
+
|
+
|
|
EXPANDS 30 TIMES |
+
|
+
|
|
CLASS 1 FOAM |
+
|
+
|
| UL
CLASSIFIED ASTM E-84:
FLAME SPREAD: 15
SMOKE DEVELOPED: 110 |
|
|
|
|
PROPER STORAGE & APPLICATION
REMINDERS FOR ALL 2-COMPONENT POLYURETHANE FOAMS
|
STORAGE REMINDERS
Materials may be stored below 70°F. However, temperatures of A & B canister
materials must be brought to a minimum of 70°F prior to application.
Canisters stored in low temperatures may require more than 24 hours to warm
their chemical contents.
APPLICATION REMINDERS
For optimum performance and foam quality, the temperature of the spray
environment and foam materials should be 70-80°F. Application in
temperatures below 70°F may increase set up time and reduce overall
performance of polyurethane foam.
WARRANTY AGAINST PRODUCT
PERFORMANCE/FAILURE
Please read carefully and adhere strictly to the operating instructions,
warnings and cautions contained in or affixed to this product. Failure to
follow all instructions, directions, warnings, and cautions shall release
Convenience Products from any and all liability. Representatives,
distributors and dealers of this product may make no claims or warranties
not herein expressed.
|